Punch in your patio dimensions and paver type to get an instant ballpark estimate — pavers, base stone, sand, edging, labor, and total project cost. Then send the project to a vetted local contractor for a real quote.
This is a ballpark national-average estimate. Real cost varies by site conditions, access, paver brand, market, and contractor. For a real quote with materials, design, and a binding price — submit your project and a vetted local contractor will respond.
Get a Real Quote (Free) →A paver patio in the United States typically costs $22–$45 per square foot installed — meaning a 280 sq ft patio runs about $6,000–$13,000 with average mid-range materials. The biggest drivers are paver brand, base depth, demo, and your local labor market.
Standard concrete pavers are cheapest. Premium brands like Techo-Bloc, Belgard, or Unilock cost more but look better and last longer. Large-format slabs cost more per square foot but install faster.
4" base for low-traffic patios, 6" for standard residential, 8"+ for driveways. Deeper base = more crushed stone tonnage = higher cost — but shortcut here and you'll have heaving problems in 2-3 years.
Plastic edge restraint with steel spikes plus polymeric sand for the joints — small line items but they add up across a big patio.
Removing an old patio, concrete slab, or thick lawn can add 10-15% to project cost depending on disposal access.
Highest in the Northeast and West Coast, lowest in the Midwest and South. Crew size, access, and paver pattern complexity drive labor cost.
Reputable contractors carry insurance, equipment, and warranty obligations. A 15% overhead-and-profit cushion on top of materials + labor is healthy for a quality install.
It's a national-average ballpark. The calculator uses typical 2026 pricing for materials and labor in the US. Real cost varies by your specific market, paver brand, site access, slope, drainage requirements, and what your contractor's overhead and profit need to be. For a binding price, get a real quote from a local contractor — we can match you with one for free.
For a quality installation with proper base prep and mid-range pavers, expect $22–$30 per square foot. Below $18/sf is usually corner-cutting on base depth or paver quality; above $40/sf is premium materials, complex patterns, or a high-cost labor market.
Properly installed paver patios last 25-50 years. The pavers themselves are nearly indestructible — what fails is the base. Insufficient base depth (less than 4") or skipping the geotextile fabric leads to heaving, settling, and weed growth within 2-5 years.
Per square foot, concrete is typically $8–$15 cheaper than pavers. But concrete cracks, doesn't have removable repair options, and looks worse 10 years later. Total cost of ownership over 30 years usually favors pavers because of the lower repair cost.
Yes — use our free AI landscape design tool. Upload a photo of your yard, describe the patio, and AI will render the finished design on your actual property. Then you can adjust the dimensions, paver type, and pattern before any contractor visits.